You use this function to report if the quality of the manufactured product is conforming to the defined criteria.
The quality control reporting panel will be displayed in the following cases:
- If you select to report quality control for an operation in the manufacturing order detail planning routine.
- If you report operation times in the normal operation reporting routine and there are quality control triggers defined in the item structure. See QC triggers for more information.
- If you report operation times in the normal operation reporting routine and Force QC at oper rep on the manufacturing order operation is set to YES. See Forcing QC for more information.
Note: The following describes how to access the QC reporting from the manufacturing order detail planning routine. However, the actual QC reporting panel that is accessed is identical to the one that is triggered from the normal operation reporting routine. If you are accessing the panel from the operation reporting routine, go to step 4 in this task.
- Select the Plan manufacturing order details menu item.
- You access Manufacturing order detail planning. Complete the selection fields and click OK.
- You access Manufacturing order detail planning, Total priority. Select the order number and operation for which you want to report quality control and click QC rep.
- You access Conformity criteria reporting – M-order operation reporting. Complete the following fields:
- Value
- Depending on the set-up of the conformity criteria that are connected to the item in question, several scenarios may apply to this field:
- Only pre-defined values: You can only report values that have been pre-defined. These are either defined as conforming or non-conforming.
- Pre-defined and additional values: You can report pre-defined values or insert new lines with additional values that you want to report. Values that are not pre-defined will be regarded as non-conforming.
- Range of values: If you report values inside the specified range, these will be regarded as conforming. Reported values outside of the range will be regarded as non-conforming.
- Values from plug-in program: If a plug-in program is defined for the criterion, this field displays the conformity values that are generated by the plug-in program. The quantity that is reported will be defaulted for this line.
- Note: See Item conformity group and criteria set-up for more details.
- Quantity
- Enter the number of items that correspond to the criterion value.
Click OK. Exit the routine.