The purpose of this program is to report performed manufacturing order internal operations for group orders. Used time, produced quantity, approved quantity and scrapped quantity will be reported. Since many manufacturing orders are connected to a group order, the times/quantity will be reported on several orders.
Reporting on a group order is only possible if the Used from field is set to 2 (operation) and if the Report on group field is set to YES in the group order type. The status of the group order must be lower than 60.
- Reporting date
- You can also enter the time (in HH:MM format) when reporting is done. It is optional to enter time in the textbox. If no time has been entered, then the current time is used for update on the operation. Note: The time textbox is only displayed if the MPL-TIME (Plan operation by date/time) function is activated in the Function control file. The reporting time cannot be greater than 24 and less than 0. Also, the decimal (minutes) should not be greater than 59.
- Group order number
- Note: Reporting on a group order is only possible if the Used from field is set to 2 (operation) and if the Report on group field is set to YES in the group order type.
- Approved quantity
- The approved quantity in stock unit for the manufacturing order operation reporting. This field updates the manufacturing order operation reporting and can be used to:
- Reduce the workload, if the Write down method field is set to 1 (Reported quantity) in the connected work centre.
- Create the product reception if the Manufacturing order type is set to 04 (Reception at last operation) and the reported operation is the last operation in the BOR (Bill of routing).
- Backflush used material if the Manufacturing order type is set to 02 (Backflushing at operation).
- Scrapped
- The scrapped quantity in stock unit for the manufacturing order operation reporting. This field will update the manufacturing order operation and the scrapped quantity on the Manufacturing order, Header panel and can be used to:
- Reduce the workload if the Write down method field is set to 1 (reported quantity) in the connected work centre.
- Backflush used material if the Manufacturing order type is set to 02 (Backflushing at operation).
- Report the issued material back into stock if the Re-usable material field is set to YES in the MFG control file and the material on the manufacturing order is defined as re-usable item for current or previous operations.
- Run and labour time
- The used run and labour time for the manufacturing order operation reporting.
- Machine time
- The used machine time for the manufacturing order operation reporting.
- Set-up time int
- The used internal set-up time for the manufacturing order operation reporting.
- Set-up time ext
- The used external set-up time for the manufacturing order operation reporting.
- Employee number
- Enter the employee’s number for the manufacturing order operation reporting.
- Operation complete
- Indicates if this is the last reporting on the operation. If this field is set to YES, the status of the manufacturing order operation will be changed to 60 (complete) and the remaining workload will be removed.
- Reason code
- Op times in min/dec
- Indicate the code to determine how the operation times are reported (Run and labour time, Machine time, Set-up time int, and Set-up time ext).
Code Description 1 Decimal 2 Minutes
Previous reporting:
- Order number
- The order number indicates the latest group order for which reporting was done.